SPECIFICATION
 Suitable on interior and exterior mineral surfaces such as concrete, mortar, cement panel etc. on
previously painted surfaces
 Type of decorative plaster with sparking effect
 Water resistant
 High water vapour permeability, allowing the building to breathe
 Alkali resistant
 Decocam is non flammable and friendly both to humans and environment
APPLICATION INSTRUCTIONS
All surfaces must be thoroughly cleaned and free of all loose dirt, dust, grease, loose or flaking paint, and loose surface plaster.Defects and cracks should be repaired with Sandeco Acrylic Putty. Prime new mineral and old painted surfaces with Sandeco Uniprimer with the appropriate color shade of the plaster.
Stir well before use and distribute product evenly across the surface using a stainless steel trowel.
Avoid painting in direct sunlight and in hot, humid weather.
Work areas should be taped in order to avoid 'dry edging'. Lightly dampen very hot surfaces to cool the down before applying the product.
Ensure that the air and surface temperatures are above 5°C during the application and 24 hours following the application.

TECHNICAL FEATURES & PHYSICAL CONSTANTS
COLOURS Available in a range of SANDECO special color card which can be further increased with special colors
DENSITY 1,80 ± 0,05 gr/cm³
VISCOSITY 115- 125 KU
PH 8-9
VOLUME SOLIDS, % 87 ± 2
GLOSS GRADE Matt
FLASH POINT Non-flammable
THINNING Water
DRYING TIME Dry-to-touch, 24 hours / In depth, 48-72 Hours (recorded at 23°C)
CONSUMPTION Depending on porosity of surface and environmental conditions 4 - 5 kg/m²
TEMPERATURE FOR APPLICATION + 5 °C - + 35 °C
APPLICATION TOOLS Varnish Brush
SIZES & PACKAGING 25 KG
STORAGE AND SHELF LIFE 1 year, unopened in cool frost-free conditions
WARNING Keep out of the reach of children. Avoid contact with skin and eyes.