Finish: Matt
Application: Best by brush
Thinning: With water. Mix 3parts water with 1 part Duracoat Fungicidal Wash, by volume.
Drying Time: Touch Dry 15minutes Re-coatable 24 hrs
Cleaning: Clean equipment with water.
Colour: Clear
Spread rate: 16-18 sq.mts per litre, depending on the surface porosity However spreading rate can be adversely reduced if the surface is seriously porous or spongy.
Pack Sizes: 1 lt, 5 litre, 20litres
SPECIFICATION
Before application, first scrap off the fungal growth manually using scrapper, then apply one coat of the thinned solution liberally by brush to the affected areas. Leave for 24hrs, then scrap off all the debris. Apply a second coat, allow overnight action, then apply the required paint system, such as DuraCoat Royale Emulsions, DuraCoat Duraplast, DuraCoat Vinyl Matt, DuraCoat Vinyl Silk or DuraCoat Superfast Emulsion.
Precaution: This is a toxic material, therefore the following rules must be strictly observed.
1. Wear protective clothes, face masks and hand gloves when handling.
2. DO NOT keep near food or areas where DuraCoat Fungicidal Wash is likely to come into contact with food.
3. Keep away from children’s reach.
4. If in contact with skin or eyes wash with plenty of water, then seek immediate medical attention.
5. If accidentally swallowed, DO NOT induce vomiting but seek immediate medical attention.
6. Wash hands and face with plenty of water and soap immediately after use, as DuraCoat Fungicidal Wash can cause irritation.