APPLICATION AREA
On all interior walls, plaster coating, gross concrete and wooden surfaces; it is used together with its
appropriate primer after the surface preparation.
SURFACE PREPARATION
After removing all kinds of dirt, grease, bloated paint and dust from the application surface, the surface
defects should be corrected with SAN DECO ACRYLIC PUTTY INTERIOR and undercoated with
SAN DECO DECOPRIMER.
APPLICATION INSTRUCTIONS
 ATRACTO/ATRACTO TOUCH should be mixed homogenously, without dilution.
 At first coat, ATRACTO/ATRACTO TOUCH should be applied by steel trowel or brush.
The second coat can be completed by using a towel or brush again by giving desired effect.
 Minimum 6 hours should be allowed between each coat.
 The environment of application must be kept between +5°C to +35°C within 24 hours during
and after the application.
DRYING TIME
Allow 5-6 hours for touch dry and 24 hours for complete dry at 23°C environment conditions.
THEORETICAL CONSUMPTION
Depending on the surface smoothness, its porosity and the application methods, for a single coat
application:
ATRACTO:
- 1 lt covers 8,0 – 12,5 m² of surface
- 1 kg covers 6,5 – 10,0 m2 of surface
- The paint consumption for 1 m2 area is 80-125 ml and 100-150 gr.
ATRACTO TOUCH:
- 1 lt covers 8,5 – 13 m² of surface
- 1 kg covers 7 – 11 m2 of surface
- The paint consumption for 1 m2 area is 76-118 ml and 90-140 gr.
STORAGE
It should be stored in a sealed package, in a cool and dry place and protected from direct sunlight; at a
temperature between +5°C and +35°C.

HAZARD STATEMENTS
H317 May cause an allergic skin reaction.
PRECAUTIONARY STATEMENTS
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.
EUH208 Contains chloromethylisothiazolinone and methylisothiazolinone (3:1)
May produce an allergic reaction.