APPLICATION AREA
SANDECO ART is used on walls, plasters, exposed concrete and wooden surfaces in building
interiors, after the surface preparation and with a suitable undercoat.
SURFACE PREPARATION
After cleaning all kinds of dirt, oil, blistered paint and dust from the application surfaces, surface
defects should be corrected with SAN DECO ACRYLIC PUTTY INTERIOR and painted surfaces
should be primed with SAN DECO DECOPRIMER.
APPLICATION INSTRUCTIONS
 Once the undercoat is applied, with a wooden brush, apply SANDECO ART / SANDECO ART
VELVET, without dilution. While it is still wet, apply a single layer with the wooden brush, by
forming the desired patterns with circular or linear movements,
 SANDECO ART VELVET is applied same method like SANDECO ART. The only addition
of application on to this is, shaving the final textures with plastic spatula before product dries.
 The temperature of the application environment must be kept between +5°C and +35°C during
application and for 24 hours afterwards.
DRYING TIME
Allow 4-5 hours for touch dry and 24 hours for complete dry at 23°C environment conditions.
THEORETICAL CONSUMPTION
Depending on the surface smoothness, its porosity and the application methods, for a single coat
application:
-1 lt covers 6,5 – 8,5 m² of surface
-1 kg covers 5,0 – 6,5 m2 of surface
-The paint consumption for 1 m2 area is 120 – 160 ml and 150 - 200 gr.
STORAGE
It should be stored in a sealed package, in a cool and dry place and protected from direct sunlight;
during at a temperature between +5oC and +35oC.

HAZARD STATEMENTS
H317 May cause an allergic skin reaction.
PRECAUTIONARY STATEMENTS
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.
EUH208 Contains chloromethylisothiazolinone and methylisothiazolinone (3:1)
May produce an allergic reaction.